Hp Mediasmart Server Ex475 Software 15 __HOT__
CLICK HERE >>> https://urllio.com/2t8qnF
Well I can attest that a USB to HDMI / VGA adapter did not work for me. I really need just a super KISS (keep it simple stupid) way to install some kind of NAS software to my HP server without going through a bunch of technical crap so to speak. I can install on another pc then swap drived to the HP but without video on the HP it's just a big no-go for me.
I just bought this cpu off of aliexpress. AMD Athlon X2 3250e 1.5 GHz Dual-Core AM2+ (ADJ3250IAA5DO) CPU =a2g0s.90423188.8.131.52584c4daLJI9FIt was under $10 after taxes. the max cpu that people try to use overheats the unit and goes for $50 to $100 on ebayI recently saw this blog -imo.com/2015/04/hp-ex475-home-server-upgrade-part-1.html?m=1 -imo.com/2015/04/hp-ex475-home-server-upgrade-part-2.html?m=1 -imo.com/2015/04/hp-ex475-home-server-upgrade-part-3.html?m=1and with the vga adapter i was able to get xpenology to run on it with 4g of ram and the original cpu. I am still trying to get the version 3 update for it and i was wondering about unraid. there is drivers for the lights in linux but i would rather have the interface of xpenology or unraid.only thing is last time i tried xpenology it was unstable and the network ran at 10/100. maybe now there is a better injected driver or one you can install afterwards
Well, the hard drive on my computer crapped out and had to reformat it. However, whenever I try to install the Windows Home Connector, it tells me that it can't find my server. I get that same error message when I try to install the software on any other computer.
HP and Microsoft are both hoping that these new class of home network servers will be a big hit. While some industry analysts believe that the home networking market is too complex for many consumers, the hope is that these products will take some of the difficulty out of setting up a home network and make it more accessible for the average buyer. HP has included management software such as the Media Server control panel that aims to make this possible.
Microsoft has many versions of server software to fill business needs. This software is complicated and usually administered by someone who specializes in working with a particular server version. Microsoft has read the writing on the wall and more robust server software versions and rebuilt it to focus on the needs, expectations, and abilities of the home user. Enter Windows Home Server!
As mentioned above, WHS is meant to be used without a monitor and keyboard. If you purchase an OEM product, such as the HP MediaSmart servers above, the OS is already installed. These ship without a monitor, keyboard, or mouse. If you plan to buy the software you will need all three to complete the installation, but can remove them after you have everything set up! This "headless" operation makes finding an out of the way place to put your server very easy.
Part of a WHS installation is installing the connector software on each computer on your network. The connector will allow each computer to communicate with the server through the console, enable the back up feature, put a shortcut to the shared folders on the desktop, and add a tray icon which indicates the health of your network.
The final tab is another add-in named WHS Disk Management, which is intended to those who install the software on their own computer. This add-in shows similar information as the Server Storage tab, but allows you to see what drive is where in your server. This could be important if your server reports you have a bad drive!
Thanks for this tutorial.For those who are not so good with computers there's a alternative way to install WHS on a HP Mediasmart.Take the HD out of the bay where you want to install the OS on.Hook it up an other computer (no other drives can be attached) which supports x64 cpu's.Now you can see what you are doing. And enter trough the setup.When the computers reboots for the first time shut it down and put the HD back in you mediasmart.Turn it on and wait for about 10 min then find out which ip the homeserver getst and connect to it with your browser.The rest shows it way.Hopefully someone finds this usefull.Greetings,Wizzz
Windows Home Server Computer Backup automatically backs up all of the computers in a home to the server using an image-based system that ensures point-in-time-based restoration of either entire PCs or specific files and folders. Complete bare-metal restores are initiated through a restore bootable CD, file based restores are initiated through the WHS client software which allows the users to open a backup and "drag and drop" files from it. This technology uses Volume Shadow Services (VSS) technology on the client computer to take an image based backup of a running computer. Because the backup operates on data at the cluster level, single instancing can be performed to minimize the amount of data that travels over the network and that will ultimately be stored on the home server. This single instancing gives the server the ability to store only one instance of data, no matter if the data originated from another computer, another file, or even data within the same file.
Windows Home Server features integration with Windows XP (SP2 or newer), Windows Vista, and Windows 7 (after the release of Power Pack 3) through a software installation, either from a client CD or via a network share. The connector software may also be installed by accessing yourserver:55000 through a web browser, where a link is provided to download the connector software and to install troubleshooting tools. Files stored on Windows Home Server are also available through a Windows share, opening compatibility to a wide variety of operating systems. Also, the Administration console is available via Remote Desktop, allowing administration from unsupported platforms. 2b1af7f3a8